Preke Teleprompter

Teleprompter

Follow Mirror (teleprompter) Mirror both axes Framing guides

Speed 40

Font Size 48

Script

Good evening, and welcome to the studio rehearsal feed.

This extended dummy teleprompter script is intentionally long so you can test mirror behavior, scroll stability, touch control, and readability over a full session.
Use this as a stress pass for speed changes, pause and resume timing, and consistent eye-line performance.

Chapter 1. Warm start.
We begin slowly, with clear sentence breaks and moderate line length.
The first objective is to confirm that text is fully visible at the top of the viewing area.
The second objective is to verify that motion is smooth at low speed and does not jitter when playback starts.
The third objective is to ensure the first lines remain readable when the operator opens and closes the control panel.
If anything clips at the edges, adjust font size and confirm the text remains centered in the safe area.

Chapter 2. Natural pacing.
Now increase speed slightly and maintain a steady rhythm.
This section mixes short and medium sentences to mimic real presenter cadence.
Watch for stutter, drift, or jumps when changing speed while text is moving.
Pause in the middle of a sentence, wait three seconds, and resume.
The line should continue naturally without sudden offsets.
Repeat this twice to confirm consistency.

Chapter 3. Mirror verification.
Switch mirror mode on and off and verify that each mode behaves predictably.
In normal mode, the text should move in the default direction and remain stable.
In mirror-both mode, the text should move in the opposite direction automatically.
There should be no need for a separate direction selector.
No lines should disappear when playback starts.
No lines should jump out of frame when toggling mirror during a pause.
No horizontal inversion mismatch should remain after the toggle settles.

Chapter 4. Long-read comfort.
This block is designed for sustained reading.
A presenter should be able to follow this section without eye strain from uneven vertical velocity.
The motion should feel continuous.
Words should stay crisp.
Line spacing should remain comfortable at distance.
If operators are using tablet glass reflection, camera-facing output should remain legible and correctly mirrored.
Take note of any subtle drift that appears only after one or two minutes of continuous scroll.

Chapter 5. Touch and override handling.
While text is playing, drag directly on the script with touch input.
The manual drag should feel immediate, not delayed.
After manual interaction, auto-follow should remain predictable.
Try quick repeated touches near the middle of the screen.
Try long drags from bottom to top and top to bottom.
Try touching near the edges where accidental gestures are common.
The teleprompter should never lock up.
The script should never teleport.
The control buttons should remain responsive.

Chapter 6. Mid-session adjustments.
Change font size down by ten points and then up by fifteen points.
Keep playback active while making this change.
Text should reflow without losing position context.
Now reduce speed to a crawl and then raise it to a faster tempo.
Playback should still be smooth.
If motion spikes are visible, note the exact point where they occur.
Run this pass once in mirror mode and once in mirror-both mode.

Chapter 7. Broadcast simulation.
Good evening, this is your live rehearsal bulletin.
Tonight we cover production readiness, operator workflows, and on-camera confidence checks.
First, the studio confirms that route switching remains stable under repeated transitions.
Second, teleprompter mirror integrity remains within expected tolerance across rehearsal duration.
Third, automatic suggestion markers are available for operator review.
Fourth, low-risk edits can be applied without interrupting primary script flow.
Fifth, all systems report normal status at this time.
We now continue with the extended update.
The rehearsal director confirms that timing remains on schedule.
Camera framing checks are complete.
Audio checks are complete.
Presentation confidence monitor is active.
The control panel remains available for rapid intervention.
Standby for segment transition.

Chapter 8. Dense text stress test.
This sentence is deliberately long and information-heavy to test how dense phrasing behaves while moving at medium speed across a mirrored setup where visual fatigue can happen quickly if line breaks are poor or velocity is inconsistent.
This sentence is another dense block intended to expose tiny jitter artifacts that may not appear in shorter lines but become visible during sustained continuous reading when the operator is also adjusting controls.
This line returns to normal length.
This line is short.
This line is medium length and should pass without visual disruption.

Chapter 9. Repetition pass A.
Read this paragraph twice at the same speed.
Read this paragraph twice at the same speed.
Read this paragraph twice at the same speed.
Read this paragraph twice at the same speed.
Read this paragraph twice at the same speed.

Chapter 10. Repetition pass B.
Increase speed by a small amount and read again.
Increase speed by a small amount and read again.
Increase speed by a small amount and read again.
Increase speed by a small amount and read again.
Increase speed by a small amount and read again.

Chapter 11. Repetition pass C.
Enable mirror-both mode and read this block continuously.
Enable mirror-both mode and read this block continuously.
Enable mirror-both mode and read this block continuously.
Enable mirror-both mode and read this block continuously.
Enable mirror-both mode and read this block continuously.

Chapter 12. Endurance block.
This is the long-run rehearsal section designed to keep the script active for an extended test.
The purpose is to identify issues that only appear after prolonged operation.
Continue reading naturally.
Maintain steady pace.
Keep head movement minimal.
Observe whether the script remains visually stable.
Observe whether button response remains immediate.
Observe whether mirror behavior remains correct through the entire pass.
If all checks pass, the teleprompter is ready for live rehearsal and operator sign-off.

Final checkpoint.
If this final line arrives smoothly with no clipping, no drift, and correct mirror behavior, the configuration is validated for practical use.

Chapter 13. Continuous segment one.
This additional section extends total runtime for longer field testing.
Maintain a calm, even reading tone while the script advances.
Confirm that text positioning remains stable after several minutes.
Confirm that the first visible line remains fully readable.
Confirm that the controls remain responsive while scrolling.
This line exists to keep cadence regular.
This line exists to keep cadence regular.
This line exists to keep cadence regular.
This line exists to keep cadence regular.
This line exists to keep cadence regular.
This line exists to keep cadence regular.
This line exists to keep cadence regular.
This line exists to keep cadence regular.
This line exists to keep cadence regular.
This line exists to keep cadence regular.

Chapter 14. Continuous segment two.
Switch between follow on and follow off while preserving readability.
Pause for two seconds.
Resume and verify there is no jump.
Pause for two seconds.
Resume and verify there is no jump.
Pause for two seconds.
Resume and verify there is no jump.
Drag the script manually and release.
Drag the script manually and release.
Drag the script manually and release.
Return to automatic movement and continue reading.
Return to automatic movement and continue reading.
Return to automatic movement and continue reading.

Chapter 15. Pronunciation and pacing drill.
Norwegian test line: Dette er en test av teleprompterens stabilitet over tid.
Norwegian test line: Vi kontrollerer flyt, speiling, og lesbarhet pa skjerm.
Norwegian test line: Tempoet skal vare jevnt uten hopp eller hakking.
English test line: We verify fluent motion and clear line boundaries.
English test line: We verify fluent motion and clear line boundaries.
English test line: We verify fluent motion and clear line boundaries.
Norwegian test line: Operatoren skal kunne stoppe og starte uten problemer.
Norwegian test line: Operatoren skal kunne stoppe og starte uten problemer.
Norwegian test line: Operatoren skal kunne stoppe og starte uten problemer.

Chapter 16. Long continuity block.
Line 01: This is a continuity line for long-run rehearsal.
Line 02: This is a continuity line for long-run rehearsal.
Line 03: This is a continuity line for long-run rehearsal.
Line 04: This is a continuity line for long-run rehearsal.
Line 05: This is a continuity line for long-run rehearsal.
Line 06: This is a continuity line for long-run rehearsal.
Line 07: This is a continuity line for long-run rehearsal.
Line 08: This is a continuity line for long-run rehearsal.
Line 09: This is a continuity line for long-run rehearsal.
Line 10: This is a continuity line for long-run rehearsal.
Line 11: This is a continuity line for long-run rehearsal.
Line 12: This is a continuity line for long-run rehearsal.
Line 13: This is a continuity line for long-run rehearsal.
Line 14: This is a continuity line for long-run rehearsal.
Line 15: This is a continuity line for long-run rehearsal.
Line 16: This is a continuity line for long-run rehearsal.
Line 17: This is a continuity line for long-run rehearsal.
Line 18: This is a continuity line for long-run rehearsal.
Line 19: This is a continuity line for long-run rehearsal.
Line 20: This is a continuity line for long-run rehearsal.
Line 21: This is a continuity line for long-run rehearsal.
Line 22: This is a continuity line for long-run rehearsal.
Line 23: This is a continuity line for long-run rehearsal.
Line 24: This is a continuity line for long-run rehearsal.
Line 25: This is a continuity line for long-run rehearsal.
Line 26: This is a continuity line for long-run rehearsal.
Line 27: This is a continuity line for long-run rehearsal.
Line 28: This is a continuity line for long-run rehearsal.
Line 29: This is a continuity line for long-run rehearsal.
Line 30: This is a continuity line for long-run rehearsal.
Line 31: This is a continuity line for long-run rehearsal.
Line 32: This is a continuity line for long-run rehearsal.
Line 33: This is a continuity line for long-run rehearsal.
Line 34: This is a continuity line for long-run rehearsal.
Line 35: This is a continuity line for long-run rehearsal.
Line 36: This is a continuity line for long-run rehearsal.
Line 37: This is a continuity line for long-run rehearsal.
Line 38: This is a continuity line for long-run rehearsal.
Line 39: This is a continuity line for long-run rehearsal.
Line 40: This is a continuity line for long-run rehearsal.
Line 41: This is a continuity line for long-run rehearsal.
Line 42: This is a continuity line for long-run rehearsal.
Line 43: This is a continuity line for long-run rehearsal.
Line 44: This is a continuity line for long-run rehearsal.
Line 45: This is a continuity line for long-run rehearsal.
Line 46: This is a continuity line for long-run rehearsal.
Line 47: This is a continuity line for long-run rehearsal.
Line 48: This is a continuity line for long-run rehearsal.
Line 49: This is a continuity line for long-run rehearsal.
Line 50: This is a continuity line for long-run rehearsal.

Chapter 17. Speed staircase.
Read at low speed for ten lines.
Read at low speed for ten lines.
Read at low speed for ten lines.
Read at low speed for ten lines.
Read at low speed for ten lines.
Read at medium speed for ten lines.
Read at medium speed for ten lines.
Read at medium speed for ten lines.
Read at medium speed for ten lines.
Read at medium speed for ten lines.
Read at higher speed for ten lines.
Read at higher speed for ten lines.
Read at higher speed for ten lines.
Read at higher speed for ten lines.
Read at higher speed for ten lines.
Return to medium speed and continue.
Return to medium speed and continue.
Return to medium speed and continue.
Return to medium speed and continue.
Return to medium speed and continue.

Chapter 18. Mirror endurance.
Toggle horizontal mirror and verify immediate response.
Toggle mirror-both and verify immediate response.
Continue playback without changing speed.
Continue playback without changing speed.
Continue playback without changing speed.
Continue playback without changing speed.
Continue playback without changing speed.
Pause and resume once.
Pause and resume twice.
Pause and resume three times.
Now continue uninterrupted to the next chapter.

Chapter 19. Broadcast style readout.
Good evening and welcome to the extended rehearsal bulletin.
All systems are under active observation.
Teleprompter visibility is within expected range.
Control response times remain within expected range.
Mirror behavior is being validated against practical field use.
Operators are checking long-form readability and continuity.
No critical issues are reported at this stage.
Proceeding to longer duration output validation.
This line is included for pacing.
This line is included for pacing.
This line is included for pacing.
This line is included for pacing.
This line is included for pacing.
This line is included for pacing.
This line is included for pacing.
This line is included for pacing.
This line is included for pacing.
This line is included for pacing.

Chapter 20. Final long tail.
This closing section deliberately adds extra volume for practical endurance tests.
Continue reading at your normal on-camera rhythm.
Observe that text remains sharp and centered.
Observe that movement remains smooth and predictable.
Observe that controls remain touch-friendly over long sessions.
Observe that no unexpected reset occurs.
Observe that no clipping appears at the top or bottom.
Observe that mirror mode remains consistent from start to finish.
Line A.
Line B.
Line C.
Line D.
Line E.
Line F.
Line G.
Line H.
Line I.
Line J.
Line K.
Line L.
Line M.
Line N.
Line O.
Line P.
Line Q.
Line R.
Line S.
Line T.
Line U.
Line V.
Line W.
Line X.
Line Y.
Line Z.

End of extended dummy prompt.
If you reach this line, the script length is now suitable for long practical testing on the iPad teleprompter rig.

No active suggestions.

Advanced settings